MODEL: SR18 SR24 SR30
MATERIAL WIDTHS: 18" 24" 30"
MAX. MATERIAL THICKNESS: 1/4"    
MAX. MATERIAL USED WITH PULL THROUGH STRAIGHTENER:
  12GA (.105") FOR 24" WIDTH AND SMALLER
(.107") FOR OVER 24" TO 30"
ROLL DIAMETER: 3.75"
PATH HEIGHT: 48 +/- 4"
MOTOR: INDRAMAT MDD112D 336 IN LB CONTINUOUS
606 IN LB PEAK

FEED PERFORMANCE WITH PULL THROUGH STRAIGHTENER
@180 DEGREE FEED ANGLE & 120 IN/S ACCELERATION
 

INDEX SPM
5"
10"
15"
20"
30"
40"
50"		 69
50
41
32
29
25
22

NOTE:  Performances stated are achievable only if an adequate loop and coil feed system is provided.  The above figures are for guidance only and are not guaranteed.  Individual applications should be reviewed according to their specific requirements (material, strength, surface finish, etc.).  For continuous improvement, we reserve the right to change the specifications and design at any time.